Commencal Meta HT V3 Complete Bike
What the checker saysnot checked
No fit check runs on a complete bike, and we will not pretend one does. A complete bike does not fill a slot in the builder, so the checker has no counterpart to compare it against and has never produced a single sentence about one.
$2,699.00 to $3,500.00 MSRP
What the maker states
- Wheel configs
- Frame takes 29" and 29"/27.5" wheels
- Maximum fork travel
- Approved for a fork up to 150 mm of travel
- Design fork travel
- Maker-stated design fork travel 150 mm
- Rear axle
- Boost 148x12
- Bottom bracket
- Bottom-bracket shell BSA threaded 68
- Head tube upper
- Upper head-tube bore ZS56/28.6 (S.H.I.S.)
The maker’s build kit
The maker’s own component list, taken from the page linked below. Nothing on this list has been fit checked as a set.
Meta HT V3 Essential (2025)
16 of 21 parts on this list are verified rows here and are linked.
- Frame: Commencal Meta HT V3
- Fork: Fox 36 Rhythm 150
- Front Wheel: Spank Spike Race 33 / Formula DC-711 front (not a verified row in this catalog)
- Rear Wheel: Spank Spike Race 33 / Formula DC-348A rear (not a verified row in this catalog)
- Front Tire: Maxxis Dissector 29x2.6 EXO+ 3C MaxxTerra
- Rear Tire: Maxxis Dissector 29x2.6 EXO+ 3C MaxxTerra
- Shifter: SRAM SX Eagle Trigger
- Rear Derailleur: SRAM SX Eagle
- Cassette: SRAM PG-1210 SX Eagle 11-50 (not a verified row in this catalog)
- Chain: SRAM NX Eagle 12-speed
- Crankset: SRAM X1 1000 Eagle DUB
- Bottom Bracket: SRAM DUB BSA 73
- Front Brake: SRAM DB8
- Rear Brake: SRAM DB8
- Front Rotor: SRAM G2 CleanSweep 200mm (6-bolt)
- Rear Rotor: SRAM G2 CleanSweep 200mm (6-bolt)
- Handlebar: Commencal Ride Alpha R27 800
- Stem: Commencal Ride Alpha Enduro Stem 40
- Grips: ODI Longneck V2.1 Lock-On Grips (not a verified row in this catalog)
- Dropper Post: KS Rage-i (31.6mm) (not a verified row in this catalog)
- Saddle: SDG Bel-Air V3
Meta HT V3 Signature (2025)
17 of 20 parts on this list are verified rows here and are linked.
- Frame: Commencal Meta HT V3
- Fork: Fox 36 Factory 150
- Front Wheel: DT Swiss 370 / EX 511 (not a verified row in this catalog)
- Rear Wheel: DT Swiss 370 / EX 511 (not a verified row in this catalog)
- Front Tire: Maxxis Assegai 29x2.5 EXO+ MaxxGrip
- Rear Tire: Maxxis Minion DHR II 29x2.5 EXO+ MaxxTerra
- Shifter: SRAM Eagle 90 Transmission Shifter
- Rear Derailleur: SRAM Eagle 90 Transmission
- Cassette: SRAM XS-1270 Eagle Transmission 10-52
- Chain: SRAM Eagle 70 Transmission Flattop
- Crankset: SRAM Eagle 70 Transmission DUB
- Bottom Bracket: SRAM DUB BSA 68
- Front Brake: SRAM DB8
- Rear Brake: SRAM DB8
- Front Rotor: SRAM CenterLine 200mm (6-bolt)
- Rear Rotor: SRAM CenterLine 200mm (6-bolt)
- Handlebar: Race Face Chester 35
- Stem: Race Face Aeffect R
- Dropper Post: KS Rage-i (31.6mm) (not a verified row in this catalog)
- Saddle: Fizik Terra Aidon X5
2 verified variants
| Variant | Price (MSRP) | Weight | Source | Last checked | Build |
|---|---|---|---|---|---|
| Meta HT V3 Essential (2025) | $2,699.00 | not stated | maker’s page | 2026-07-17 | Build with this |
| Meta HT V3 Signature (2025) | $3,500.00 | not stated | maker’s page | 2026-07-15 | Build with this |
What the maker states1 not published
1 further field the checker looks for is not published by Commencal, so we leave it blank rather than estimate it, and that check stays silent on this complete bike. It is rotor adapter documented. Each is recorded as “not stated by the maker (not checked)”.
Source: each variant links the maker’s own page in the table above. Last checked 2026-07-15 to 2026-07-17.