BuildMyMTB
Prototype - Evolving Daily

Federal Half Link Chain Chain

Chain: Pitch 1/8"; Half-link chain. 1 verified variant.

What the checker says2check before you buy

Run variant by variant through the BMX builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.

Checked against 661 verified BMX parts in this catalog. 649 produced no finding of any kind.

Check before you buy

  • Check before you buywarning · Rear CogChain width mismatch: Rear cog = 3/32in, Chain = 1/8in. Sprocket, cog and chain should share one width class (1/8in or 3/32in) - a mixed stack runs but skips and wears fast. On 10 of the 29 verified rear cogs in this catalog.
  • Check before you buywarning · SprocketChain width mismatch: Sprocket = 3/32in, Chain = 1/8in. Sprocket, cog and chain should share one width class (1/8in or 3/32in) - a mixed stack runs but skips and wears fast. On 2 of the 18 verified sprockets in this catalog.
The checker compares the dimensions listed in what we check, and what we don’t. “No conflicts found” means no conflict among those dimensions — not a guarantee that a build works. Errors mean it won’t fit; warnings mean it works but check; infos are notes.

$33.27 MSRP

What the maker states

Pitch
1/8"
Half link
Half-link chain
Source

Source: the maker’s page. Last checked 2026-08-21.

Checked against

The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.

6 of 519 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.

Where this sits

All Federal chainsOpen a variant in the builder to see the ones that apply to your own parts