BuildMyMTB
Theme ▾
Prototype - Evolving Daily

Ridley Kanzo A Frame

Add to Build

What it needs from the rest of the bike

Rear axle
12x142
Bottom bracket
Bottom-bracket shell bsa-road
Seatpost
Takes a 27.2 mm seatpost

$800.00 Price: sample. The only source is a maker spec page that never publishes a price.

Weight: 1620 g (sample).

Listed on ridley-bikes.com. Checked 2026-07-20.

Same standards in other frames

Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.

More frames, all brands

More specs8 listed·42 not listed by Ridley
  • Built for 700c and 650b wheels.
  • Brake system disc-flat.
  • Brake mount flat-mount.
  • Steerer Tapered (1.5-1.125).
  • Tire up to 42 mm on 700c and 55 mm on 650b (maker-stated maximum).
  • Front-derailleur mount braze-on.
  • Sold as a frameset, not a bare frame.
  • Alloy construction.

42 further fields the checker looks for are not listed by Ridley, so we leave them blank rather than estimate them, and those 42 checks stay silent on this frame. Missing: maximum tire basis, maximum rear rotor, minimum rear rotor, head tube upper, head tube lower, headset included, headset included model, headset included part, maximum fork travel, minimum fork travel, design fork travel, fork travel hard, fork travel maximum stated, maximum fork axle to crown, dropout type, udh, drive mode, gearbox mount, maximum tire (2x) by wheel, maximum tire fender by wheel, fender mounts, maximum chainring (1x), maximum big chainring (2x), head tube upper angle, head tube lower angle, flat mount thickness, seat clamp diameter, ASTM category, maximum system weight, bottom bracket shell width, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, Di2 provision, Di2 battery mount, belt drive, routing system, rear derailleur hanger, electronic shifting only and rear axle alts. Each is recorded as “not listed by Ridley”.

Specs last checked July 20, 2026