BuildMyMTB
Theme ▾
Prototype - Evolving Daily

Vitus Substance Carbon Frame

Add to Build

What it needs from the rest of the bike

Rear axle
12x142
Bottom bracket
Bottom-bracket shell bsa-road
Seatpost
Takes a 27.2 mm seatpost

$1,699.00 Price: converted from the maker's non-USD price. It is not a US MSRP.

Weight: 1300 g (sample).

Listed on vitusbikes.com. Checked 2026-10-21.

Same standards in other frames

Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.

Other Vitus frames

More frames, all brands

More specs8 listed·42 not listed by Vitus
  • Built for 700c and 650b wheels.
  • Brake system disc-flat.
  • Brake mount flat-mount.
  • Steerer Tapered (1.5-1.125).
  • Tire up to 42 mm on 700c and 47 mm on 650b (maker-stated maximum).
  • Front-derailleur mount braze-on.
  • Sold as a frame only.
  • Fender mounts: yes.

42 further fields the checker looks for are not listed by Vitus, so we leave them blank rather than estimate them, and those 42 checks stay silent on this frame. Missing: maximum tire basis, maximum rear rotor, minimum rear rotor, material, head tube upper, head tube lower, headset included, headset included model, headset included part, maximum fork travel, minimum fork travel, design fork travel, fork travel hard, fork travel maximum stated, maximum fork axle to crown, dropout type, udh, drive mode, gearbox mount, maximum tire (2x) by wheel, maximum tire fender by wheel, maximum chainring (1x), maximum big chainring (2x), head tube upper angle, head tube lower angle, flat mount thickness, seat clamp diameter, ASTM category, maximum system weight, bottom bracket shell width, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, Di2 provision, Di2 battery mount, belt drive, routing system, rear derailleur hanger, electronic shifting only and rear axle alts. Each is recorded as “not listed by Vitus”.

Specs last checked October 21, 2026