BuildMyMTB
Theme ▾
Prototype - Evolving Daily

PNW Loam Pedals

PNW Loam Pedal Gen 2
Photo: PNW
⚠ This model is covered by a recall notice
The notice names 1 of the 2 versions on this page: Loam Pedal Gen 2.
The pedal axle can crack, causing the pedal to detach from the crank — a fall hazard to the rider. CPSC records four reports of the axle cracking and detaching; no injuries reported.
Who it applies to: Not limited by serial number — CPSC lists every Loam Pedal Gen 2 sold from June 2025 through November 2025 (about 1,200 pairs, through PNWComponents.com, REI.com, Backcountry.com, JensonUSA.com and independent bike shops). The recalled pedal is identifiable by a “Tectonic” logo laser-etched into the pedal body on the left corner, on the same side as the threaded axle.
Remedy: CPSC and PNW say to STOP USING THE PEDALS IMMEDIATELY. PNW Components is supplying free replacement axles, and a free Range Pedal in the interim. Contact PNW at 833-902-3381 (9am–4pm PT, Mon–Fri) or via their recall page. The maker’s own recall page
Recorded from the notice below — we cannot tell which unit you have, so read its scope before acting. U.S. CPSC recall 26-180, January 8, 2026 — “PNW Components Recalls Aluminum Alloy Bicycle Pedals Due to Crash Hazard”

$159.00 1 · 420 to 440 g (sample)

Add to Build

Catalog status of the PNW Loam, by version:

The checker has no fit rule for a pedal, so this page states the maker's figures and price only.

The same on every Loam

Style
Flat pedal

Which Loam exists

One box per version in our catalog, each with its own price. Nothing here is picked for you.

VersionPrice
Alloy Pedals Gen$159
Pedal Gen$159†recalled

† estimate

Every version

PNW Loam Alloy Pedals Gen 3

$159.00

Price: MSRP confirmed against the manufacturer.

Maker's US price

Weight
440 g (sample)
Checked
2026-11-13
Source
pnwcomponents.com (where PNW Loam Alloy Pedals Gen 3 was listed)
Add to Build: PNW Loam Alloy Pedals Gen 3

Where to buy

These are paid links: we may earn a commission. As an Amazon Associate I earn from qualifying purchases. How links work

A link never changes a fit verdict or the order parts appear in.

Specified on

No complete bike in our catalog lists this exact version in its build kit.

PNW Loam Pedal Gen 2

$159.00

Price: no maker price exists. The shown price is from a third-party listing.

Weight
420 g (sample)
Checked
2026-07-22
Source
pnwcomponents.com (where PNW Loam Pedal Gen 2 was listed)
Status
The catalog records this variant as recalled. No recorded successor.
Add to Build: PNW Loam Pedal Gen 2

Where to buy

These are paid links: we may earn a commission. As an Amazon Associate I earn from qualifying purchases. How links work

A link never changes a fit verdict or the order parts appear in.

Specified on

No complete bike in our catalog lists this exact version in its build kit.

  1. The price basis differs between variants. Open one to see each. Back to price

Same standards in other pedals

Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.

Other PNW pedals

More pedals, all brands

More from PNW

More specs3 listed·3 not listed by PNW
  • Spindle material: Steel.
  • Platform width: 109.
  • Platform depth: 115.

3 further fields are not listed by PNW, so we leave them blank rather than estimate them. Missing: platform size, cleat system and body material. Each is recorded as “not listed by PNW”.

Each version links the page it was listed on, in its own details above. Checked 2026-07-22 to 2026-11-13.

Specs last checked November 13, 2026