BuildMyMTB
Theme ▾
Prototype - Evolving Daily

Cannondale SuperSix EVO Frameset Frame

Add to Build

What it needs from the rest of the bike

Rear axle
12x142
Bottom bracket
Bottom-bracket shell bsa-road
Seatpost
Proprietary
Maximum rear rotor
Rear rotor up to 160 mm (maker-stated maximum)
Maximum tire
Tire up to 32 mm (maker-stated maximum)
UDH
SRAM Universal Derailleur Hanger

$3,200.00 Price: sample. The only source is a maker spec page that never publishes a price.

Weight: 910 g (sample).

Listed on cannondale.com. Checked 2026-07-23.

Same standards in other frames

Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.

Other Cannondale frames

More frames, all brands

More from Cannondale

More specs8 listed·31 not listed by Cannondale
  • Built for 700c wheels.
  • Brake system disc-flat.
  • Brake mount flat-mount.
  • Steerer cannondale-delta.
  • Maximum tire basis: measured.
  • Rear rotor no smaller than 140 mm.
  • Front-derailleur mount braze-on.
  • Sold as a frame only.

31 further fields the checker looks for are not listed by Cannondale, so we leave them blank rather than estimate them, and those 31 checks stay silent on this frame. Missing: head tube upper, head tube lower, headset included, headset included model, headset included part, maximum tire (2x), maximum tire fender, fender mounts, maximum chainring (1x), maximum big chainring (2x), head tube upper angle, head tube lower angle, rim mount, brake drop, flat mount thickness, seat clamp diameter, ASTM category, maximum system weight, bottom bracket shell width, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rim nut length, Di2 provision, Di2 battery mount, routing system, rear derailleur hanger, electronic shifting only and rear axle alts. Each is recorded as “not listed by Cannondale”.

Specs last checked July 23, 2026