BuildMyMTB
Theme ▾
Prototype - Evolving Daily

Pivot Shuttle LT Frame

Add to Build

What it needs from the rest of the bike

Motor mount
Bosch-performance-cx
Battery system
Bosch-smart-system
Wheel configs
Frame takes 29" and 29"/27.5" wheels
Suspension
Full-suspension frame
Travel rear
Rear travel 162 mm
Maximum fork travel
Approved for a fork up to 180 mm of travel

$6,999.00 Price: not an MSRP. This is an OE-only part, never sold separately at a consumer price.

Weight: not listed.

Listed on pivotcycles.com. Checked 2026-11-12.

Same standards in other frames

Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.

Other Pivot frames

More frames, all brands

More from Pivot

More specs12 listed·56 not listed by Pivot
  • Maker-stated design fork travel 170 mm.
  • Fork travel maximum stated: yes.
  • Maximum chainring: 36.
  • Seatpost diameter 31.6 mm.
  • Rear axle 157x12.
  • Rear rotor up to 203 mm (maker-stated maximum).
  • Rear rotor no smaller than 200 mm.
  • Shock eye-to-eye 205 mm.
  • Shock stroke 65 mm.
  • Carbon frame.
  • SRAM Universal Derailleur Hanger.
  • Shock mount Trunnion.

56 further fields the checker looks for are not listed by Pivot, so we leave them blank rather than estimate them, and those 56 checks stay silent on this frame. Missing: wheel config change, travel front, minimum fork travel, fork travel hard, maximum fork axle to crown, battery mounts, stated drive units, range extender, head tube, brake mount, maximum tire, maximum tire mm, maximum tire basis, maximum tire by wheel, udh unstated, udh retrofit kit, head tube upper, head tube lower, head tube upper alts, head tube lower alts, frame only, alt shock strokes, coil approved, headset included, headset included model, headset included part, drive mode, gearbox mount, belt drive, shock hardware, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, shock stroke by size, shock by size, motor mount alts, display replaceable, integrated display, speed sensor ring, headset routing, belt line, belt line tolerance, head tube upper angle, head tube lower angle, excludes shock families, excludes coil and ASTM category. Each is recorded as “not listed by Pivot”.

Specs last checked November 12, 2026