BuildMyMTB
Theme ▾
Prototype - Evolving Daily

GT Grade Carbon Elite Frame

Add to Build

What it needs from the rest of the bike

Rear axle
12x142
Bottom bracket
Bottom-bracket shell bsa-road
Seatpost
Takes a 27.2 mm seatpost
Maximum rear rotor
Rear rotor up to 160 mm (maker-stated maximum)

$2,400.00 Price: sample, not verified.

Weight: 1150 g (sample).

Listed on gtbicycles.com. Checked 2026-09-23.

Same standards in other frames

Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.

Other GT frames

More frames, all brands

More specs9 listed·40 not listed by GT
  • Built for 700c wheels.
  • Brake system disc-flat.
  • Brake mount flat-mount.
  • Steerer Tapered 1.125-1.5.
  • Tire up to 45 mm on 700c (maker-stated maximum).
  • Front-derailleur mount braze-on.
  • Rear rotor no smaller than 160 mm.
  • Sold as a frameset, not a bare frame.
  • Maximum fork axle to crown: 436.7.

40 further fields the checker looks for are not listed by GT, so we leave them blank rather than estimate them, and those 40 checks stay silent on this frame. Missing: maximum tire basis, material, head tube upper, head tube lower, headset included, headset included model, headset included part, maximum fork travel, minimum fork travel, design fork travel, fork travel hard, fork travel maximum stated, dropout type, udh, drive mode, gearbox mount, maximum tire (2x) by wheel, maximum tire fender by wheel, fender mounts, maximum chainring (1x), maximum big chainring (2x), head tube upper angle, head tube lower angle, flat mount thickness, seat clamp diameter, ASTM category, maximum system weight, bottom bracket shell width, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, Di2 provision, Di2 battery mount, belt drive, routing system, rear derailleur hanger, electronic shifting only and rear axle alts. Each is recorded as “not listed by GT”.

Specs last checked September 23, 2026