BuildMyMTB
Theme ▾
Prototype - Evolving Daily

Niner RLT 9 Frame

$1,200.00 to $2,499.99 1 · 1150 g (sample)

Add to Build

The same on every RLT 9

Rear axle
12x142
Bottom bracket
Bottom-bracket shell pf30
Seatpost
Takes a 27.2 mm seatpost

Differs by version: head tube upper, head tube lower and maximum rear rotor. Each version’s own figures are in its details.

Which RLT 9 exists

One box per version in our catalog, each with its own price. Nothing here is picked for you.

VersionPrice
Aluminum$1,200†
RDO$2,499.99on 1 bike
Steel$1,799.99

† estimate · “on N bikes”: complete bikes in our catalog whose build kit lists that exact version

Every version

Niner RLT 9 Aluminum

$1,200.00

Price: sample. The only source is a maker spec page that never publishes a price.

Head tube upper
Upper head-tube bore IS42/28.6 (S.H.I.S.)
Head tube lower
Lower head-tube bore IS52/40 (S.H.I.S.)
Maximum rear rotor
Rear rotor up to 160 mm (maker-stated maximum)
Front derailleur mount
not listed
Material
Alloy construction
Fender mounts
yes
Weight
not listed
Checked
2026-10-24
Source
ninerbikes.com (where Niner RLT 9 Aluminum was listed)
Add to Build: Niner RLT 9 Aluminum

Specified on

No complete bike in our catalog lists this exact version in its build kit.

Niner RLT 9 RDO (2023)

$2,499.99

Price: MSRP confirmed against the manufacturer.

Maker's US price

Head tube upper
not listed
Head tube lower
not listed
Maximum rear rotor
Rear rotor up to 160 mm (maker-stated maximum)
Front derailleur mount
Front-derailleur mount braze-on
Material
not listed
Fender mounts
yes
Weight
1150 g (sample)
Checked
2026-11-13
Source
ninerbikes.com (where Niner RLT 9 RDO (2023) was listed)
Add to Build: Niner RLT 9 RDO (2023)

Specified on

Niner RLT 9 Steel

$1,799.99

Price: MSRP confirmed against the manufacturer.

Maker's US price

Head tube upper
not listed
Head tube lower
not listed
Maximum rear rotor
not listed
Front derailleur mount
not listed
Material
Steel construction
Weight
not listed
Checked
2026-11-13
Source
ninerbikes.com (where Niner RLT 9 Steel was listed)
Add to Build: Niner RLT 9 Steel

Specified on

No complete bike in our catalog lists this exact version in its build kit.

  1. The price basis differs between variants. Open one to see each. Back to price

Same standards in other frames

Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.

More frames, all brands

More from Niner

More specs13 listed·37 not listed by Niner
  • Upper head-tube bore IS42/28.6 (S.H.I.S.) (on 1 of 3 variants).
  • Lower head-tube bore IS52/40 (S.H.I.S.) (on 1 of 3 variants).
  • Rear rotor up to 160 mm (maker-stated maximum) (on 2 of 3 variants).
  • Built for 700c and 650b wheels.
  • Brake system disc-flat.
  • Brake mount flat-mount.
  • Steerer Tapered (1.5-1.125).
  • Tire up to 50 mm on 700c and 50 mm on 650b (maker-stated maximum).
  • Maximum tire basis: label.
  • Sold as a frame only.
  • Front-derailleur mount braze-on (on 1 of 3 variants).
  • Alloy construction (on 1 of 3 variants); Steel construction (on 1 of 3 variants).
  • Fender mounts: yes (on 2 of 3 variants).

37 further fields the checker looks for are not listed by Niner, so we leave them blank rather than estimate them, and those 37 checks stay silent on this frame. Missing: minimum rear rotor, headset included, headset included model, headset included part, maximum fork travel, minimum fork travel, design fork travel, fork travel hard, fork travel maximum stated, maximum fork axle to crown, dropout type, udh, drive mode, gearbox mount, maximum tire (2x) by wheel, maximum tire fender by wheel, maximum chainring (1x), maximum big chainring (2x), head tube upper angle, head tube lower angle, flat mount thickness, seat clamp diameter, ASTM category, maximum system weight, bottom bracket shell width, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, Di2 provision, Di2 battery mount, belt drive, routing system, rear derailleur hanger, electronic shifting only and rear axle alts. Each is recorded as “not listed by Niner”.

Each version links the page it was listed on, in its own details above. Checked 2026-10-24 to 2026-11-13.

Specs last checked November 13, 2026