BuildMyMTB
Prototype - Evolving Daily

Rene Herse Hatcher Pass 700x48 Standard Front Tire

What the checker says3will not fit22check before you buy

Run variant by variant through the gravel bike builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.

Checked against 721 verified gravel bike parts in this catalog. 679 produced no finding of any kind.

Will not fit

  • Will not fiterror · Rear WheelWheel size mismatch: Rear wheel = 650b, Front tire = 700c. A road or gravel build runs one wheel size end to end. On 11 of the 68 verified rear wheels in this catalog.
  • Will not fiterror · Front WheelWheel size mismatch: Front wheel = 650b, Front tire = 700c. A road or gravel build runs one wheel size end to end. On 8 of the 56 verified front wheels in this catalog.
  • Will not fiterror · FrameUnsupported wheel size: Bombtrack Hook EXT supports 650b, but this build is 700c. On 1 of the 69 verified frames in this catalog.

Check before you buy

  • Check before you buywarning · ForkTire clearance: the 48mm tire is at the limit of the 50mm the maker states as a measured clearance. A printed tire width carries about 3mm of tolerance and grows with internal rim width, pressure and use, so measure your own clearance before buying. On 2 of the 30 verified forks in this catalog.

Rg tire fork, Fork. 12 more findings from the same check, on up to 1 of the 30 verified forks each.

Rg tire rim, Front Wheel. 9 more findings from the same check, on up to 1 of the 56 verified front wheels each.

Open a variant in the builder to see the ones that apply to your own parts.

The checker compares the dimensions listed in what we check, and what we don’t. “No conflicts found” means no conflict among those dimensions — not a guarantee that a build works. Errors mean it won’t fit; warnings mean it works but check; infos are notes.

$87.00 MSRP·475 g

What the maker states

Wheel
Built for a 700c wheel
Width
Tire width 48
Casing
standard casing
Tubeless
Ready (maker-stated)
The rest of what the maker states1 not published

1 further field the checker looks for is not published by Rene Herse, so we leave it blank rather than estimate it, and that check stays silent on this front tire. It is compound. Each is recorded as “not stated by the maker (not checked)”.

Source: the maker’s page. Last checked 2026-08-10.

Checked against

The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.

6 of 423 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.

Where this sits

Previous: Rene Herse Fleecer Ridge 700x55 StandardNext: Rene Herse Hurricane Ridge 700x42 StandardAll Rene Herse tiresOpen a variant in the builder to see the ones that apply to your own parts