BuildMyMTB
Prototype - Evolving Daily

TRP DH-R EVO Front Brake

What the checker says2will not fit4check before you buy

Run variant by variant through the mountain bike builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.

Checked against 6082 verified mountain bike parts in this catalog. 6057 produced no finding of any kind.

Will not fit

  • Will not fiterror · ShifterShifter mount: Shimano CUES SL-U8000-11IR is a I-Spec II lever-integrated shifter (no bar clamp of its own), and the brake levers take MatchMaker X / I-Spec EV, so it does not bolt to them. The band-clamp version of the shifter, or a ShiftMount-style adapter, is what bridges that. A shim or adapter may make other sizes or standards work, but that is a modification, not a fit. On 1 of the 53 verified shifters in this catalog.
  • Will not fiterror · ShifterShifter mount: Shimano Saint SL-M820-B-I (I-SPEC B) is a I-Spec B lever-integrated shifter (no bar clamp of its own), and the brake levers take MatchMaker X / I-Spec EV, so it does not bolt to them. The band-clamp version of the shifter, or a ShiftMount-style adapter, is what bridges that. A shim or adapter may make other sizes or standards work, but that is a modification, not a fit. On 1 of the 53 verified shifters in this catalog.

Check before you buy

  • Check before you buywarning · Front RotorFront rotor thickness: TRP DH-R EVO is designed for 2.3mm rotors and this rotor is 1.8mm - check the brake maker's rotor-thickness spec before buying. On 11 of the 177 verified rotors in this catalog.
  • Check before you buywarning · Front RotorFront rotor thickness: TRP DH-R EVO is designed for 2.3mm rotors and this rotor is 2.0mm - check the brake maker's rotor-thickness spec before buying. On 7 of the 177 verified rotors in this catalog.
  • Check before you buywarning · Front RotorFront rotor thickness: TRP DH-R EVO is designed for 2.3mm rotors and this rotor is 2.2mm - check the brake maker's rotor-thickness spec before buying. On 4 of the 177 verified rotors in this catalog.
  • Check before you buywarning · Front RotorFront rotor thickness: TRP DH-R EVO is designed for 2.3mm rotors and this rotor is 1.95mm - check the brake maker's rotor-thickness spec before buying. On 1 of the 177 verified rotors in this catalog.
The checker compares the dimensions listed in what we check, and what we don’t. “No conflicts found” means no conflict among those dimensions — not a guarantee that a build works. Errors mean it won’t fit; warnings mean it works but check; infos are notes.

$297.00 MSRP·310 g

What the maker states

Mount
Post mount caliper
Pistons
4-piston caliper
Design rotor thickness
Design rotor thickness: 2.3
Lever accepts
MatchMaker X and I-Spec EV
The rest of what the maker states4 not published

4 further fields the checker looks for are not published by TRP, so we leave them blank rather than estimate them, and those 4 checks stay silent on this front brake. They are maximum rotor, excludes rotor, maximum rotor evidence and design rotor thickness maximum. Each is recorded as “not stated by the maker (not checked)”.

Source: the maker’s page. Last checked 2026-07-16.

Checked against

The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.

6 of 1862 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.

Where this sits

TRP DH-R EVO is the first model on that list.Next: TRP EVOAll TRP brakesOpen a variant in the builder to see the ones that apply to your own parts