Dartmoor Two6Player Pro Frame
What it needs from the rest of the bike
- Wheel configs
- Frame takes 26" wheels
- Maximum fork travel
- Approved for a fork up to 130 mm of travel
- Minimum fork travel
- Approved for a fork down to 90 mm of travel
- Rear axle
- 10x135 bolt-on
- Bottom bracket
- Bottom-bracket shell BSA threaded 73
- Head tube upper
- Upper head-tube bore IS42 (S.H.I.S.)
- Head tube lower
- Lower head-tube bore IS52 (S.H.I.S.)
- Seat tube
- Seatpost diameter 30.9 mm
- Maximum rear rotor
- Rear rotor up to 160 mm (maker-stated maximum)
- Maximum tire
- Tire up to 2.35" (maker-stated maximum)
- UDH
- Dropout: not listed by the maker
$355.00 Price: sample. The only source is a maker spec page that never publishes a price.
Weight: 2080 g (sample).
Listed on dartmoor-bikes.com. Checked 2026-10-14.
Same standards in other frames
- Rear axle: 10x135 bolt-on
2 other frames in our mountain bike catalog state this figure on every version: Evil Faction II, Banshee Amp. - Head tube upper: Upper head-tube bore IS42 (S.H.I.S.)
2 other frames in our mountain bike catalog state this figure on every version: Cannondale Habit HT, Cannondale Jekyll. - Head tube lower: Lower head-tube bore IS52 (S.H.I.S.)
3 other frames in our mountain bike catalog state this figure on every version: Pivot Mach 4 SL, Cannondale Habit HT, Cannondale Jekyll.
Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.
More frames, all brands
- Antidote Carbonjack
- Atherton S.150
- Canfield Lithium V3
- Chromag Doctahawk
- Chromag Lowdown
- Commencal Meta HT V3
- Cube TWO15 Pro
- Deviate Claymore
- Focus Thron 6.9
- Giant Trance X
- GT Force Carbon
- Juliana Roubion
- Niner Jet 9 RDO
- Norco Range C1
- Pivot Firebird
- Polygon Collosus T8 Carbon
- Propain Hugene 3 CF
- Ragley Mmmbop
- Rocky Mountain Instinct
- Santa Cruz 5010 5
- Specialized Demo Race
- Specialized P.3
- Starling Twist
- Trek Procaliber C Gen 3
- Trek Supercaliber SLR Gen 2
- Whyte Secta
More specs6 listed·50 not listed by Dartmoor
- Fits a Tapered (1.5-1.125) head tube.
- Brake mount I.S. mount.
- Hardtail frame.
- Dropouts Horizontal dropouts.
- Sold as a frame only.
- Aluminum construction.
50 further fields the checker looks for are not listed by Dartmoor, so we leave them blank rather than estimate them, and those 50 checks stay silent on this frame. Missing: minimum rear rotor, shock eye, shock stroke, shock mount, travel, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, alt shock strokes, shock stroke by size, shock by size, travel by stroke, design fork travel, fork travel hard, coil approved, fork travel maximum stated, excludes shock families, excludes coil, maximum fork axle to crown, drive mode, gearbox mount, belt drive, udh unstated, udh retrofit kit, maximum tire mm, maximum tire basis, maximum tire by wheel, maximum chainring, front derailleur mount, front derailleur clamp diameter, front derailleur direct mount, head tube upper angle, head tube lower angle, head tube upper alts, head tube lower alts, rear axle alts, headset included, headset included model, headset included part, maker shocks and ASTM category. Each is recorded as “not listed by Dartmoor”.
Specs last checked October 14, 2026