BuildMyMTB
Theme ▾
Prototype - Evolving Daily

Niner Jet 9 RDO Frame

Add to Build

What it needs from the rest of the bike

Wheel configs
Frame takes 29" wheels
Travel
Frame travel 120 mm (maker-stated)
Shock eye
Shock eye-to-eye 165 mm
Shock stroke
45 mm
Shock mount
Trunnion
Maximum fork travel
Approved for a fork up to 140 mm of travel
Rear axle
Boost 148x12
Bottom bracket
Bottom-bracket shell BSA threaded 73
Head tube upper
Upper head-tube bore ZS44/28.6 (S.H.I.S.)
Head tube lower
Lower head-tube bore ZS56/40 (S.H.I.S.)
Seat tube
Seatpost diameter 30.9 mm
Maximum rear rotor
Rear rotor up to 180 mm (maker-stated maximum)
Maximum tire
Tire up to 2.6" (maker-stated maximum)
UDH
SRAM Universal Derailleur Hanger

$7,299.99 Price: not an MSRP. This is an OE-only part, never sold separately at a consumer price.

Weight: not listed.

Listed on ninerbikes.com. Checked 2026-08-01.

Same standards in other frames

Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.

Other Niner frames

More frames, all brands

More from Niner

More specs5 listed·48 not listed by Niner
  • Fits a Tapered (1.5-1.125) head tube.
  • Brake mount Post mount.
  • Full-suspension frame.
  • Sold as a frameset, not a bare frame.
  • Carbon construction.

48 further fields the checker looks for are not listed by Niner, so we leave them blank rather than estimate them, and those 48 checks stay silent on this frame. Missing: minimum rear rotor, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, alt shock strokes, shock stroke by size, shock by size, travel by stroke, minimum fork travel, design fork travel, fork travel hard, coil approved, fork travel maximum stated, excludes shock families, excludes coil, maximum fork axle to crown, drive mode, dropout type, gearbox mount, belt drive, udh unstated, udh retrofit kit, maximum tire mm, maximum tire basis, maximum tire by wheel, maximum chainring, front derailleur mount, front derailleur clamp diameter, front derailleur direct mount, head tube upper angle, head tube lower angle, head tube upper alts, head tube lower alts, rear axle alts, headset included, headset included model, headset included part, maker shocks and ASTM category. Each is recorded as “not listed by Niner”.

Specs last checked August 1, 2026