Deviate Highlander II Frame
What it needs from the rest of the bike
- Wheel configs
- Frame takes 29" wheels
- Travel
- Frame travel 145 mm (maker-stated)
- Shock eye
- Shock eye-to-eye 210 mm
- Shock stroke
- 55 mm
- Shock mount
- Standard eyelet
- Maximum fork travel
- Approved for a fork up to 160 mm of travel
- Design fork travel
- Maker-stated design fork travel 160 mm
- Rear axle
- Boost 148x12
- Bottom bracket
- Bottom-bracket shell BSA threaded 73
- Head tube upper
- Upper head-tube bore ZS44/28.6 (S.H.I.S.)
- Head tube lower
- Lower head-tube bore ZS56/40 (S.H.I.S.)
- Seat tube
- Seatpost diameter 34.9 mm
- UDH
- SRAM Universal Derailleur Hanger
$3,600.00 Price: no maker price exists. The shown price is from a third-party listing.
Weight: 3200 g (sample).
Listed on deviatecycles.com. Checked 2026-07-10.
Same standards in other frames
- Head tube upper: Upper head-tube bore ZS44/28.6 (S.H.I.S.)
85 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Forbidden Heathen, Knolly Chilcotin 170, Pipedream Sirius, Ragley Piglet, Surly Karate Monkey, Antidote Carbonjack. - Head tube lower: Lower head-tube bore ZS56/40 (S.H.I.S.)
90 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: GT Force Carbon, Niner Jet 9 RDO, Propain Hugene 3 CF, Rocky Mountain Growler, Transition TR11 Alloy, Commencal FRS. - Shock mount: Standard eyelet
96 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Ibis Ripmo V2, Polygon Collosus DH9, Salsa Spearfish C, Specialized Status 2 140, Yeti SB130, Canyon Spectral AL.
Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.
Other Deviate frames
- Deviate Claymore · Frame takes 29" and 29"/27.5" wheels · Rear axle Boost 148x12 · Fits a Tapered (1.5-1.125) head tube
More frames, all brands
- Atherton A.170
- Banshee Amp
- Canfield Tilt V3
- Chromag Primer
- Chromag Reazon
- Commencal Meta TR V4
- Deviate Claymore
- Devinci Spartan
- Forbidden Dreadnought V2
- GT Fury
- GT Sensor Carbon
- Kona Process X
- Norco Optic C1
- Norco Revolver HT
- Pivot Mach 4 SL
- Privateer 141
- Propain Spindrift AL
- Revel Ranger
- Rose Root Miller
- Santa Cruz Bronson
- Specialized Epic 8
- Specialized Status 2 140
- Surly Krampus
- Trek Roscoe Gen 4
- Turner Scrub Ti
- Yeti ASR
More specs6 listed·48 not listed by Deviate
- Fits a Tapered (1.5-1.125) head tube.
- Brake mount Post mount.
- Rear rotor no smaller than 180 mm.
- Full-suspension frame.
- Sold as a frame only.
- Carbon construction.
48 further fields the checker looks for are not listed by Deviate, so we leave them blank rather than estimate them, and those 48 checks stay silent on this frame. Missing: maximum rear rotor, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, alt shock strokes, shock stroke by size, shock by size, travel by stroke, minimum fork travel, fork travel hard, coil approved, fork travel maximum stated, excludes shock families, excludes coil, maximum fork axle to crown, drive mode, dropout type, gearbox mount, belt drive, udh unstated, udh retrofit kit, maximum tire, maximum tire mm, maximum tire basis, maximum tire by wheel, maximum chainring, front derailleur mount, front derailleur clamp diameter, front derailleur direct mount, head tube upper angle, head tube lower angle, head tube upper alts, head tube lower alts, rear axle alts, headset included, headset included model, headset included part, maker shocks and ASTM category. Each is recorded as “not listed by Deviate”.
Specs last checked July 10, 2026