Surly Karate Monkey Frame
What it needs from the rest of the bike
- Wheel configs
- Frame takes 29" and 27.5" wheels
- Maximum fork travel
- Approved for a fork up to 140 mm of travel
- Rear axle
- Boost 148x12
- Bottom bracket
- Bottom-bracket shell BSA threaded 73
- Head tube upper
- Upper head-tube bore ZS44/28.6 (S.H.I.S.)
- Head tube lower
- Lower head-tube bore EC44/30 (S.H.I.S.)
- Seat tube
- Seatpost diameter 30.9 mm
- Maximum rear rotor
- Rear rotor up to 203 mm (maker-stated maximum)
- UDH
- Dropout: not listed by the maker
$999.00 Price: MSRP confirmed against the manufacturer.
Maker's US price
Weight: not listed.
Listed on surlybikes.com. Checked 2026-11-13.
Same standards in other frames
- Head tube upper: Upper head-tube bore ZS44/28.6 (S.H.I.S.)
85 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Alutech Fanes 29, Deviate Highlander II, Forbidden Heathen, Intense Primer, Pipedream The Full Moxie, Ragley Piglet. - Bottom bracket: Bottom-bracket shell BSA threaded 73
170 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Yeti SB140, Canyon Grand Canyon AL, Evil Following LS, Knolly Chilcotin 170, Polygon Collosus T8 Carbon, Salsa Timberjack 2.0. - Rear axle: Boost 148x12
204 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Yeti SB135, Canyon Spectral AL, Devinci Spartan, Intense Primer, Pivot Mach 4 SL, Rose Root Miller.
Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.
Other Surly frames
- Surly Krampus · Frame takes 29" wheels · Rear axle Boost 148x12 · Fits a Straight 1.125 (single-crown) head tube
- Surly Sorceress · Frame takes 29" and 27.5" wheels · Rear axle Boost 148x12 · Fits a Tapered (1.5-1.125) head tube
More frames, all brands
- Atherton A.130
- Banshee Spitfire
- Canfield Nimble 9
- Chromag Doctahawk
- Commencal Clash V3
- Commencal Meta SX V5
- Deviate Claymore
- Evil Following LS
- Focus Thron 6.9
- GT Fury
- Ibis Ripley AF V2
- Juliana Roubion
- Norco Range C1
- Norco Sight 160 C1
- Pivot Les SL
- Propain Hugene 3 CF
- Propain Tyee 6.1
- Ragley Mmmbop
- Santa Cruz Blur 4
- Santa Cruz Bronson
- Specialized Demo Race
- Starling Twist
- Surly Krampus
- Trek Roscoe Gen 3
- Vitus Sommet
- Whyte Secta
More from Surly
More specs10 listed·48 not listed by Surly
- Fits a Straight 1.125 (single-crown) head tube.
- Brake mount I.S. mount.
- Hardtail frame.
- Maximum fork axle to crown: 551.
- Sold as a frame only.
- Tire up to 2.5 mm on 29" and 3 mm on 27.5" (maker-stated maximum).
- Front derailleur mount: band-clamp.
- Front derailleur clamp diameter: 34.9.
- Rear axle alts: 142x12 (pre-Boost).
- Steel construction.
48 further fields the checker looks for are not listed by Surly, so we leave them blank rather than estimate them, and those 48 checks stay silent on this frame. Missing: minimum rear rotor, shock eye, shock stroke, shock mount, travel, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, alt shock strokes, shock stroke by size, shock by size, travel by stroke, minimum fork travel, design fork travel, fork travel hard, coil approved, fork travel maximum stated, excludes shock families, excludes coil, drive mode, dropout type, gearbox mount, belt drive, udh unstated, udh retrofit kit, maximum tire, maximum tire mm, maximum tire basis, maximum chainring, front derailleur direct mount, head tube upper angle, head tube lower angle, head tube upper alts, head tube lower alts, headset included, headset included model, headset included part, maker shocks and ASTM category. Each is recorded as “not listed by Surly”.
Specs last checked November 13, 2026