BuildMyMTB
Theme ▾
Prototype - Evolving Daily

Propain Tyee 6.1 Frame

$1,899.00 to $2,899.00 1 · 2900 to 3400 g (sample)

Add to Build

The same on every Tyee 6.1

Wheel configs
Frame takes 29", 27.5" and 29"/27.5" wheels
Travel
Frame travel 160 mm (maker-stated)
Shock eye
Shock eye-to-eye 210 mm
Shock stroke
55 mm
Shock mount
Standard eyelet
Maximum fork travel
Approved for a fork up to 170 mm of travel
Rear axle
Boost 148x12
Bottom bracket
Bottom-bracket shell BSA threaded 73
Head tube upper
Upper head-tube bore ZS56 (S.H.I.S.)
Head tube lower
Lower head-tube bore ZS56 (S.H.I.S.)
Seat tube
Seatpost diameter 31.6 mm
UDH
SRAM Universal Derailleur Hanger

Differs by version: maximum rear rotor. Each version’s own figures are in its details.

Which Tyee 6.1 exists

One box per version in our catalog, each with its own price. Nothing here is picked for you.

† estimate · “on N bikes”: complete bikes in our catalog whose build kit lists that exact version

Every version

Propain Tyee 6.1 AL (2023)

$1,899.00

Price: no maker price exists. The shown price is from a third-party listing.

Maximum rear rotor
Rear rotor up to 200 mm (maker-stated maximum)
Material
Aluminum construction
Minimum rear rotor
not listed
Weight
3400 g (sample)
Checked
2026-09-22
Source
propain-bikes.com (where Propain Tyee 6.1 AL (2023) was listed)
Add to Build: Propain Tyee 6.1 AL (2023)

Specified on

Propain Tyee 6.1 CF (2023)

$2,899.00

Price: no maker price exists. The shown price is from a third-party listing.

Maximum rear rotor
not listed
Material
Carbon construction
Minimum rear rotor
Rear rotor no smaller than 200 mm
Weight
2900 g (sample)
Checked
2026-09-22
Source
propain-bikes.com (where Propain Tyee 6.1 CF (2023) was listed)
Add to Build: Propain Tyee 6.1 CF (2023)

Specified on

No complete bike in our catalog lists this exact version in its build kit.

  1. The maker publishes no price. This one is from a shop listing. Back to price

Same standards in other frames

Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.

Other Propain frames

More frames, all brands

More from Propain

More specs7 listed·48 not listed by Propain
  • Rear rotor up to 200 mm (maker-stated maximum) (on 1 of 2 variants).
  • Fits a Tapered (1.5-1.125) head tube.
  • Brake mount Post mount.
  • Full-suspension frame.
  • Sold as a frame only.
  • Aluminum construction (on 1 of 2 variants); Carbon construction (on 1 of 2 variants).
  • Rear rotor no smaller than 200 mm (on 1 of 2 variants).

48 further fields the checker looks for are not listed by Propain, so we leave them blank rather than estimate them, and those 48 checks stay silent on this frame. Missing: frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, alt shock strokes, shock stroke by size, shock by size, travel by stroke, minimum fork travel, design fork travel, fork travel hard, coil approved, fork travel maximum stated, excludes shock families, excludes coil, maximum fork axle to crown, drive mode, dropout type, gearbox mount, belt drive, udh unstated, udh retrofit kit, maximum tire, maximum tire mm, maximum tire basis, maximum tire by wheel, maximum chainring, front derailleur mount, front derailleur clamp diameter, front derailleur direct mount, head tube upper angle, head tube lower angle, head tube upper alts, head tube lower alts, rear axle alts, headset included, headset included model, headset included part, maker shocks and ASTM category. Each is recorded as “not listed by Propain”.

Each version links the page it was listed on, in its own details above. Checked 2026-09-22.

Specs last checked September 22, 2026