BuildMyMTB
Theme ▾
Prototype - Evolving Daily

Devinci Troy Frame

$2,199.00 to $4,999.00 1 · 3000 to 3400 g (sample)

Add to Build

The same on every Troy

Wheel configs
Frame takes 29" and 29"/27.5" wheels
Travel
Frame travel 150 mm (maker-stated)
Shock eye
Shock eye-to-eye 185 mm
Shock stroke
55 mm
Shock mount
Trunnion
Maximum fork travel
Approved for a fork up to 160 mm of travel
Design fork travel
Maker-stated design fork travel 160 mm
Rear axle
Boost 148x12
Bottom bracket
Bottom-bracket shell BSA threaded 73
Head tube upper
Upper head-tube bore ZS44 (S.H.I.S.)
Head tube lower
Lower head-tube bore ZS56 (S.H.I.S.)
Seat tube
Seatpost diameter 31.6 mm
UDH
SRAM Universal Derailleur Hanger

Differs by version: maximum rear rotor. Each version’s own figures are in its details.

Which Troy exists

One box per version in our catalog, each with its own price. Nothing here is picked for you.

VersionPrice
Carbon$4,999†on 1 bike
Troy$2,199on 1 bike

† estimate · “on N bikes”: complete bikes in our catalog whose build kit lists that exact version

Every version

Devinci Troy Carbon (2025)

$4,999.00

Price: sample. The only source is a maker spec page that never publishes a price.

Maximum rear rotor
Rear rotor up to 220 mm (maker-stated maximum)
Material
Carbon construction
Minimum rear rotor
Rear rotor no smaller than 200 mm
Weight
3000 g (sample)
Checked
2026-10-14
Source
devinci.com (where Devinci Troy Carbon (2025) was listed)
Add to Build: Devinci Troy Carbon (2025)

Specified on

Devinci Troy (2025)

$2,199.00

Price: MSRP confirmed against the manufacturer.

Maker's US price

Maximum rear rotor
Rear rotor up to 200 mm (maker-stated maximum)
Material
Aluminum construction
Minimum rear rotor
not listed
Weight
3400 g (sample)
Checked
2026-07-22
Source
devinci.com (where Devinci Troy (2025) was listed)
Add to Build: Devinci Troy (2025)

Specified on

  1. The price basis differs between variants. Open one to see each. Back to price

Same standards in other frames

Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.

Other Devinci frames

More frames, all brands

More from Devinci

More specs9 listed·45 not listed by Devinci
  • Rear rotor up to 200 mm (maker-stated maximum) (on 1 of 2 variants); Rear rotor up to 220 mm (maker-stated maximum) (on 1 of 2 variants).
  • Fits a Tapered (1.5-1.125) head tube.
  • Brake mount Post mount.
  • Full-suspension frame.
  • Sold as a frameset, not a bare frame.
  • Tire up to 66 mm (maker-stated maximum).
  • Maximum tire basis: measured.
  • Aluminum construction (on 1 of 2 variants); Carbon construction (on 1 of 2 variants).
  • Rear rotor no smaller than 200 mm (on 1 of 2 variants).

45 further fields the checker looks for are not listed by Devinci, so we leave them blank rather than estimate them, and those 45 checks stay silent on this frame. Missing: frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, alt shock strokes, shock stroke by size, shock by size, travel by stroke, minimum fork travel, fork travel hard, coil approved, fork travel maximum stated, excludes shock families, excludes coil, maximum fork axle to crown, drive mode, dropout type, gearbox mount, belt drive, udh unstated, udh retrofit kit, maximum tire, maximum tire by wheel, maximum chainring, front derailleur mount, front derailleur clamp diameter, front derailleur direct mount, head tube upper angle, head tube lower angle, head tube upper alts, head tube lower alts, rear axle alts, headset included, headset included model, headset included part, maker shocks and ASTM category. Each is recorded as “not listed by Devinci”.

Each version links the page it was listed on, in its own details above. Checked 2026-07-22 to 2026-10-14.

Specs last checked October 14, 2026