BuildMyMTB
Theme ▾
Prototype - Evolving Daily

Chromag Rootdown Frame

$950.00 to $2,900.00 · 2409 to 3234 g (sample)

Add to Build

The same on every Rootdown

Maximum fork travel
Approved for a fork up to 170 mm of travel
Minimum fork travel
Approved for a fork down to 150 mm of travel
Design fork travel
Maker-stated design fork travel 160 mm
Rear axle
Boost 148x12
Bottom bracket
Bottom-bracket shell BSA threaded 73
Head tube upper
Upper head-tube bore ZS44 (S.H.I.S.)
Head tube lower
Lower head-tube bore ZS56 (S.H.I.S.)
Seat tube
Seatpost diameter 31.6 mm
UDH
SRAM Universal Derailleur Hanger

Differs by version: wheel configs and maximum rear rotor. Each version’s own figures are in its details.

Which Rootdown exists

One box per version in our catalog, each with its own price. Nothing here is picked for you.

Version29"29" and 27.5"
RootdownNot in our catalog$950on 1 bike
Ti$2,900on 1 bikeNot in our catalog

a striped box is a combination not in our catalog · “on N bikes”: complete bikes in our catalog whose build kit lists that exact version

Every version

Chromag Rootdown (2024)

$950.00

Price: MSRP confirmed against the manufacturer.

Maker's US price

Wheel configs
Frame takes 29" and 27.5" wheels
Maximum rear rotor
not listed
Material
Steel construction
Weight
3234 g (sample)
Checked
2026-11-13
Source
us.chromagbikes.com (where Chromag Rootdown (2024) was listed)
Add to Build: Chromag Rootdown (2024)

Specified on

Chromag Rootdown Ti (2025)

$2,900.00

Price: MSRP confirmed against the manufacturer.

Maker's US price

Wheel configs
Frame takes 29" wheels
Maximum rear rotor
Rear rotor up to 200 mm (maker-stated maximum)
Material
Titanium construction
Weight
2409 g (sample)
Checked
2026-11-13
Source
us.chromagbikes.com (where Chromag Rootdown Ti (2025) was listed)
Add to Build: Chromag Rootdown Ti (2025)

Specified on

Same standards in other frames

Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.

Other Chromag frames

More frames, all brands

More from Chromag

More specs9 listed·49 not listed by Chromag
  • Frame takes 29" and 27.5" wheels (on 1 of 2 variants); Frame takes 29" wheels (on 1 of 2 variants).
  • Rear rotor up to 200 mm (maker-stated maximum) (on 1 of 2 variants).
  • Fits a Tapered (1.5-1.125) head tube.
  • Brake mount Post mount.
  • Rear rotor no smaller than 180 mm.
  • Hardtail frame.
  • Sold as a frame only.
  • Maximum chainring: 34.
  • Steel construction (on 1 of 2 variants); Titanium construction (on 1 of 2 variants).

49 further fields the checker looks for are not listed by Chromag, so we leave them blank rather than estimate them, and those 49 checks stay silent on this frame. Missing: shock eye, shock stroke, shock mount, travel, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, alt shock strokes, shock stroke by size, shock by size, travel by stroke, fork travel hard, coil approved, fork travel maximum stated, excludes shock families, excludes coil, maximum fork axle to crown, drive mode, dropout type, gearbox mount, belt drive, udh unstated, udh retrofit kit, maximum tire, maximum tire mm, maximum tire basis, maximum tire by wheel, front derailleur mount, front derailleur clamp diameter, front derailleur direct mount, head tube upper angle, head tube lower angle, head tube upper alts, head tube lower alts, rear axle alts, headset included, headset included model, headset included part, maker shocks and ASTM category. Each is recorded as “not listed by Chromag”.

Each version links the page it was listed on, in its own details above. Checked 2026-11-13.

Specs last checked November 13, 2026