Propain Spindrift AL Frame
What it needs from the rest of the bike
- Wheel configs
- Frame takes 29", 27.5" and 29"/27.5" wheels
- Travel
- Frame travel 180 mm (maker-stated)
- Shock eye
- Shock eye-to-eye 230 mm
- Shock stroke
- 65 mm
- Shock mount
- Standard eyelet
- Maximum fork travel
- Approved for a fork up to 200 mm of travel
- Rear axle
- Boost 148x12
- Bottom bracket
- Bottom-bracket shell BSA threaded 73
- Head tube upper
- Upper head-tube bore ZS49 (S.H.I.S.)
- Head tube lower
- Lower head-tube bore ZS56 (S.H.I.S.)
- Seat tube
- Seatpost diameter 31.6 mm
- UDH
- SRAM Universal Derailleur Hanger
$2,400.00 Price: sample. The only source is a maker spec page that never publishes a price.
Weight: 3950 g (sample).
Listed on propain-bikes.com. Checked 2026-10-24.
Same standards in other frames
- Head tube upper: Upper head-tube bore ZS49 (S.H.I.S.)
2 other frames in our mountain bike catalog state this figure on every version: Trek Roscoe Gen 4, Intense Tracer 279. - Head tube lower: Lower head-tube bore ZS56 (S.H.I.S.)
28 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Atherton A.130, Banshee Anomaly, Banshee Prime, Chromag Primer, Cube Stereo ONE44, Pivot Mach 6. - Shock mount: Standard eyelet
96 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Santa Cruz Tallboy 5, Transition Spur Carbon, Alutech Fanes 29, Commencal Meta SX V5, Frameworks Enduro, Merida One-Sixty 700.
Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.
Other Propain frames
- Propain Hugene 3 CF · Frame takes 29" wheels · Rear axle Boost 148x12 · Fits a Tapered (1.5-1.125) head tube
- Propain Rage 3 CF · Frame takes 29" and 29"/27.5" wheels · Rear axle SuperBoost 157x12 · Fits a Straight 1.125 (dual-crown) head tube
- Propain Tyee 6.1 · Frame takes 29", 27.5" and 29"/27.5" wheels · Rear axle Boost 148x12 · Fits a Tapered (1.5-1.125) head tube
More frames, all brands
- Atherton S.150
- Banshee Prime
- Canfield Tilt V3
- Chromag Primer
- Commencal Clash V2
- Commencal Meta TR V4
- Deviate Highlander II
- Evil Faction II
- Forbidden Dreadnought V2
- GT Sensor Carbon
- Ibis HD6
- Kona Process X
- Norco Revolver HT
- Norco Shore A Park
- Pivot Mach 4 SL
- Propain Rage 3 CF
- Propain Tyee 6.1
- Revel Ranger
- Santa Cruz Blur 4
- Santa Cruz Bronson
- Specialized Epic 8
- Starling Twist
- Surly Sorceress
- Trek Roscoe Gen 4
- Vitus Nucleus
- Yeti ASR
More from Propain
More specs6 listed·49 not listed by Propain
- Fits a Tapered (1.5-1.125) head tube.
- Brake mount Post mount.
- Rear rotor no smaller than 180 mm.
- Full-suspension frame.
- Sold as a frame only.
- Aluminum construction.
49 further fields the checker looks for are not listed by Propain, so we leave them blank rather than estimate them, and those 49 checks stay silent on this frame. Missing: maximum rear rotor, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, alt shock strokes, shock stroke by size, shock by size, travel by stroke, minimum fork travel, design fork travel, fork travel hard, coil approved, fork travel maximum stated, excludes shock families, excludes coil, maximum fork axle to crown, drive mode, dropout type, gearbox mount, belt drive, udh unstated, udh retrofit kit, maximum tire, maximum tire mm, maximum tire basis, maximum tire by wheel, maximum chainring, front derailleur mount, front derailleur clamp diameter, front derailleur direct mount, head tube upper angle, head tube lower angle, head tube upper alts, head tube lower alts, rear axle alts, headset included, headset included model, headset included part, maker shocks and ASTM category. Each is recorded as “not listed by Propain”.
Specs last checked October 24, 2026