Propain Rage 3 CF Frame
The Propain Rage 3 CF frame as Propain lists it: 215 mm of travel, 225 x 75 mm trunnion shock, forks up to 200 mm, SuperBoost 157x12 rear axle, BSA 83 mm shell, 31.6 mm seatpost.
What it needs from the rest of the bike
- Wheel configs
- Frame takes 29" and 29"/27.5" wheels
- Travel
- Frame travel 215 mm (maker-stated)
- Shock eye
- Shock eye-to-eye 225 mm
- Shock stroke
- 75 mm
- Shock mount
- Trunnion
- Maximum fork travel
- Approved for a fork up to 200 mm of travel
- Rear axle
- SuperBoost 157x12
- Bottom bracket
- Bottom-bracket shell BSA threaded 83 (DH)
- Head tube upper
- Upper head-tube bore ZS56 (S.H.I.S.)
- Head tube lower
- Lower head-tube bore ZS56 (S.H.I.S.)
- Seat tube
- Seatpost diameter 31.6 mm
- Maximum rear rotor
- Rear rotor up to 200 mm (maker-stated maximum)
- UDH
- Dropout: not listed by the maker
$5,679.00 Price: no maker price exists. The shown price is from a third-party listing.
Weight: not listed.
Listed on propain-bikes.com. Checked 2026-07-20.
Specified on
Complete bikes whose build kit lists this part.
Same standards in other frames
- Head tube upper: Upper head-tube bore ZS56 (S.H.I.S.)
4 other frames in our mountain bike catalog state this figure on every version; 3 from other makers: Cube Reaction C:62, Cube Stereo ONE44, Pivot Firebird. - Bottom bracket: Bottom-bracket shell BSA threaded 83 (DH)
11 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Santa Cruz V10 8, Specialized Demo Race, Trek Session C 29, Frameworks DH Frame, GT Fury, Intense M1. - Rear axle: SuperBoost 157x12
19 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Trek Session C 29, Commencal Supreme DH V5.2, Evil Insurgent LS, Evil Wreckoning LS, Knolly Chilcotin 170, Pivot Switchblade.
Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.
Other Propain frames
- Propain Hugene 3 CF · Frame takes 29" wheels · Rear axle Boost 148x12 · Fits a Tapered (1.5-1.125) head tube
- Propain Spindrift AL · Frame takes 29", 27.5" and 29"/27.5" wheels · Rear axle Boost 148x12 · Fits a Tapered (1.5-1.125) head tube
- Propain Tyee 6.1 · Frame takes 29", 27.5" and 29"/27.5" wheels · Rear axle Boost 148x12 · Fits a Tapered (1.5-1.125) head tube
More frames, all brands
- Atherton A.170
- Banshee Phantom
- Canfield Nimble 9
- Chromag Lowdown
- Chromag Throwdown
- Commencal Meta SX V5
- Deviate Claymore
- Esker Woodsy
- Forbidden Dreadnought
- GT Fury
- Ibis DV9
- Knolly Chilcotin 170
- Norco Revolver C
- Norco Revolver HT
- Pivot Les SL
- Propain Hugene 3 CF
- Propain Spindrift AL
- Ragley Piglet
- Santa Cruz 5010 5
- Santa Cruz Blur 4
- Specialized Enduro S-Works
- Starling Murmur
- Surly Krampus
- Trek Roscoe Gen 3
- Vitus Mythique 29
- Yeti ARC
More from Propain
More specs6 listed·48 not listed by Propain
- Fits a Straight 1.125 (dual-crown) head tube.
- Brake mount Post mount.
- Rear rotor no smaller than 200 mm.
- Full-suspension frame.
- Sold as a frameset, not a bare frame.
- Carbon construction.
48 further fields the checker looks for are not listed by Propain, so we leave them blank rather than estimate them, and those 48 checks stay silent on this frame. Missing: frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, alt shock strokes, shock stroke by size, shock by size, travel by stroke, minimum fork travel, design fork travel, fork travel hard, coil approved, fork travel maximum stated, excludes shock families, excludes coil, maximum fork axle to crown, drive mode, dropout type, gearbox mount, belt drive, udh unstated, udh retrofit kit, maximum tire, maximum tire mm, maximum tire basis, maximum tire by wheel, maximum chainring, front derailleur mount, front derailleur clamp diameter, front derailleur direct mount, head tube upper angle, head tube lower angle, head tube upper alts, head tube lower alts, rear axle alts, headset included, headset included model, headset included part, maker shocks and ASTM category. Each is recorded as “not listed by Propain”.
Specs last checked July 20, 2026