Frameworks DH Frame
What it needs from the rest of the bike
- Wheel configs
- Frame takes 29"/27.5" wheels
- Travel
- Frame travel 200 mm (maker-stated)
- Shock eye
- Shock eye-to-eye 250 mm
- Shock stroke
- 75 mm
- Shock mount
- Standard eyelet
- Maximum fork travel
- Approved for a fork up to 203 mm of travel
- Rear axle
- Boost 148x12
- Bottom bracket
- Bottom-bracket shell BSA threaded 83 (DH)
- Head tube upper
- Upper head-tube bore ZS56/28.6 (S.H.I.S.)
- Head tube lower
- Lower head-tube bore ZS56/40 (S.H.I.S.)
- Seat tube
- Seatpost diameter 31.6 mm
- Maximum rear rotor
- Rear rotor up to 200 mm (maker-stated maximum)
- UDH
- Dropout: not listed by the maker
$3,899.00 Price: MSRP confirmed against the manufacturer.
Maker's US price
Weight: 4110 g (sample).
Listed on rideframeworks.com. Checked 2026-11-13.
Same standards in other frames
- Bottom bracket: Bottom-bracket shell BSA threaded 83 (DH)
11 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: GT Fury, Intense M1, Propain Rage 3 CF, Santa Cruz V10 8, Transition TR11 Alloy, Trek Session C 29. - Head tube upper: Upper head-tube bore ZS56/28.6 (S.H.I.S.)
23 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Nicolai G1, RAAW Madonna V3, Scott Gambler, Transition TR11 Alloy, Commencal Meta HT V3, Commencal T.E.M.P.O.. - Head tube lower: Lower head-tube bore ZS56/40 (S.H.I.S.)
90 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Intense Tracer 279, Polygon Siskiu T, Ragley Mmmbop, Transition Scout Alloy, Canfield Tilt V3, Cube Reaction TM.
Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.
Other Frameworks frames
- Frameworks Enduro · Frame takes 29"/27.5" wheels · Rear axle Boost 148x12 · Fits a Tapered (1.5-1.125) head tube
More frames, all brands
- Alchemy Arktos 150
- Banshee Enigma
- Cannondale Scalpel HT
- Canyon Neuron
- Chromag Surface Voyager
- Cotic Jeht
- Cotic Solaris
- Esker Woodsy
- Forbidden Reya
- Frameworks Enduro
- Ibis Ripley AF V2
- Marin Alpine Trail XR
- Marin Rift Zone
- Norco Torrent HT S
- Pivot Shadowcat
- Polygon Collosus DH9
- RAAW Madonna R
- Ragley Piglet
- Rocky Mountain Growler
- Santa Cruz Tallboy 5
- Specialized Demo Race
- Specialized P.3
- Transition Smuggler Carbon
- Trek Marlin
- Trek Top Fuel Gen 4
- Yeti SB140
More specs6 listed·48 not listed by Frameworks
- Fits a Straight 1.125 (dual-crown) head tube.
- Brake mount Post mount.
- Rear rotor no smaller than 200 mm.
- Full-suspension frame.
- Sold as a frame only.
- Carbon/Alloy mix construction.
48 further fields the checker looks for are not listed by Frameworks, so we leave them blank rather than estimate them, and those 48 checks stay silent on this frame. Missing: frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, alt shock strokes, shock stroke by size, shock by size, travel by stroke, minimum fork travel, design fork travel, fork travel hard, coil approved, fork travel maximum stated, excludes shock families, excludes coil, maximum fork axle to crown, drive mode, dropout type, gearbox mount, belt drive, udh unstated, udh retrofit kit, maximum tire, maximum tire mm, maximum tire basis, maximum tire by wheel, maximum chainring, front derailleur mount, front derailleur clamp diameter, front derailleur direct mount, head tube upper angle, head tube lower angle, head tube upper alts, head tube lower alts, rear axle alts, headset included, headset included model, headset included part, maker shocks and ASTM category. Each is recorded as “not listed by Frameworks”.
Specs last checked November 13, 2026