Marin Rift Zone Frame
$1,899.00 to $2,299.00 · 3600 to 3700 g (sample)
The same on every Rift Zone
- Shock eye
- Shock eye-to-eye 210 mm
- Shock stroke
- 55 mm
- Shock mount
- Standard eyelet
- Maximum fork travel
- Approved for a fork up to 150 mm of travel
- Rear axle
- Boost 148x12
- Bottom bracket
- Bottom-bracket shell BSA threaded 73
- Seat tube
- Seatpost diameter 30.9 mm
- UDH
- Dropout: not listed by the maker
Differs by version: wheel configs, travel, design fork travel, maximum rear rotor and maximum tire. Each version’s own figures are in its details.
Which Rift Zone exists
One box per version in our catalog, each with its own price. Nothing here is picked for you.
| Version | 29" | 27.5" |
|---|---|---|
| 1 | Not in our catalog | $1,899on 1 bike |
| 2 | $2,299on 1 bike | Not in our catalog |
Scroll sideways for more →
a striped box is a combination not in our catalog · “on N bikes”: complete bikes in our catalog whose build kit lists that exact version
Tap a box to see that exact frame: its price, weight, source and build button, and the complete bikes it is specified on.
Every version
Marin Rift Zone 1 (2025)
$1,899.00
Price: MSRP confirmed against the manufacturer.
Maker's US price
- Wheel configs
- Frame takes 27.5" wheels
- Travel
- Frame travel 140 mm (maker-stated)
- Design fork travel
- Maker-stated design fork travel 150 mm
- Maximum rear rotor
- Rear rotor up to 180 mm (maker-stated maximum)
- Maximum tire
- Tire up to 2.4" (maker-stated maximum)
- Minimum rear rotor
- Rear rotor no smaller than 180 mm
- Weight
- 3700 g (sample)
- Checked
- 2026-08-02
- Source
- marinbikes.com (where Marin Rift Zone 1 (2025) was listed)
Specified on
Marin Rift Zone 2 (2026)
$2,299.00
Price: MSRP confirmed against the manufacturer.
Maker's US price
- Wheel configs
- Frame takes 29" wheels
- Travel
- Frame travel 130 mm (maker-stated)
- Design fork travel
- Maker-stated design fork travel 140 mm
- Maximum rear rotor
- Rear rotor up to 200 mm (maker-stated maximum)
- Maximum tire
- not listed
- Minimum rear rotor
- not listed
- Weight
- 3600 g (sample)
- Checked
- 2026-08-02
- Source
- marinbikes.com (where Marin Rift Zone 2 (2026) was listed)
Specified on
Same standards in other frames
- Shock mount: Standard eyelet
96 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Propain Hugene 3 CF, Santa Cruz Nomad, Transition Smuggler Carbon, Yeti SB165, Commencal Meta V5, Frameworks DH Frame. - Bottom bracket: Bottom-bracket shell BSA threaded 73
170 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Propain Hugene 3 CF, Santa Cruz Chameleon 8, Transition Scout Alloy, Alutech Fanes 29, Canyon Strive CFR, Forbidden Dreadnought. - Rear axle: Boost 148x12
204 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Production Privee Shan No5, Santa Cruz Chameleon 8, Transition Spire, Antidote Carbonjack, Chromag Primer, Forbidden Dreadnought.
Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.
Other Marin frames
- Marin Alpine Trail XR · Frame takes 29" and 29"/27.5" wheels · Rear axle Boost 148x12 · Fits a Tapered (1.5-1.125) head tube
More frames, all brands
- Alutech Fanes 29
- Banshee Anomaly
- Cannondale Scalpel HT
- Canyon Stoic
- Chromag Surface Voyager
- Cotic BFe
- Cube Reaction C:62
- Esker Woodsy
- Frameworks DH Frame
- Frameworks Enduro
- Ibis Ripley V5
- Marin Alpine Trail XR
- Merida Big Trail
- Norco Torrent HT S
- Pivot Switchblade
- Pivot Trail 429
- RAAW Madonna R
- Revel Rascal
- Rocky Mountain Growler
- Santa Cruz Nomad
- Specialized Enduro S-Works
- Specialized P.3
- Transition Smuggler Carbon
- Trek Procaliber C Gen 3
- Trek Top Fuel Gen 4
- Yeti SB140
More from Marin
More specs11 listed·48 not listed by Marin
- Frame takes 27.5" wheels (on 1 of 2 variants); Frame takes 29" wheels (on 1 of 2 variants).
- Frame travel 130 mm (maker-stated) (on 1 of 2 variants); Frame travel 140 mm (maker-stated) (on 1 of 2 variants).
- Maker-stated design fork travel 140 mm (on 1 of 2 variants); Maker-stated design fork travel 150 mm (on 1 of 2 variants).
- Rear rotor up to 180 mm (maker-stated maximum) (on 1 of 2 variants); Rear rotor up to 200 mm (maker-stated maximum) (on 1 of 2 variants).
- Tire up to 2.4" (maker-stated maximum) (on 1 of 2 variants).
- Fits a Tapered (1.5-1.125) head tube.
- Brake mount Post mount.
- Full-suspension frame.
- Sold as a frameset, not a bare frame.
- Aluminum construction.
- Rear rotor no smaller than 180 mm (on 1 of 2 variants).
48 further fields the checker looks for are not listed by Marin, so we leave them blank rather than estimate them, and those 48 checks stay silent on this frame. Missing: frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, alt shock strokes, shock stroke by size, shock by size, travel by stroke, minimum fork travel, fork travel hard, coil approved, fork travel maximum stated, excludes shock families, excludes coil, maximum fork axle to crown, drive mode, dropout type, gearbox mount, belt drive, udh unstated, udh retrofit kit, maximum tire mm, maximum tire basis, maximum tire by wheel, maximum chainring, front derailleur mount, front derailleur clamp diameter, front derailleur direct mount, head tube upper, head tube lower, head tube upper angle, head tube lower angle, head tube upper alts, head tube lower alts, rear axle alts, headset included, headset included model, headset included part, maker shocks and ASTM category. Each is recorded as “not listed by Marin”.
Each version links the page it was listed on, in its own details above. Checked 2026-08-02.
Specs last checked August 2, 2026