BuildMyMTB
Theme ▾
Prototype - Evolving Daily

Merida Big Trail Frame

$850.00 to $1,600.00 1 · 1900 to 2100 g (sample)

Add to Build

The same on every Big Trail

Wheel configs
Frame takes 29" wheels
Maximum fork travel
Approved for a fork up to 150 mm of travel
Design fork travel
Maker-stated design fork travel 140 mm
Rear axle
Boost 148x12
Bottom bracket
Bottom-bracket shell BSA threaded 73
Seat tube
Seatpost diameter 34.9 mm
Maximum tire
Tire up to 2.4" (maker-stated maximum)
UDH
Dropout: not listed by the maker

Differs by version: maximum rear rotor. Each version’s own figures are in its details.

Which Big Trail exists

One box per version in our catalog, each with its own price. Nothing here is picked for you.

† estimate · “on N bikes”: complete bikes in our catalog whose build kit lists that exact version

Every version

Merida Big Trail 300 (2026)

$850.00

Price: sample. The only source is a maker spec page that never publishes a price.

Maximum rear rotor
Rear rotor up to 180 mm (maker-stated maximum)
Weight
2100 g (sample)
Checked
2026-07-16
Source
merida-bikes.com (where Merida Big Trail 300 (2026) was listed)
Add to Build: Merida Big Trail 300 (2026)

Specified on

Merida Big Trail 500 (2026)

$1,299.00

Price: not an MSRP. This is an OE-only part, never sold separately at a consumer price.

Maximum rear rotor
Rear rotor up to 180 mm (maker-stated maximum)
Weight
1900 g (sample)
Checked
2026-07-10
Source
merida-bikes.com (where Merida Big Trail 500 (2026) was listed)
Add to Build: Merida Big Trail 500 (2026)

Specified on

Merida Big Trail 600 (2026)

$1,600.00

Price: no maker price exists. The shown price is from a third-party listing.

Maximum rear rotor
Rear rotor up to 203 mm (maker-stated maximum)
Weight
2000 g (sample)
Checked
2026-07-16
Source
merida-bikes.com (where Merida Big Trail 600 (2026) was listed)
Add to Build: Merida Big Trail 600 (2026)

Specified on

  1. The price basis differs between variants. Open one to see each. Back to price

Same standards in other frames

Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.

Other Merida frames

More frames, all brands

More from Merida

More specs7 listed·52 not listed by Merida
  • Rear rotor up to 180 mm (maker-stated maximum) (on 2 of 3 variants); Rear rotor up to 203 mm (maker-stated maximum) (on 1 of 3 variants).
  • Fits a Tapered (1.5-1.125) head tube.
  • Brake mount Post mount.
  • Hardtail frame.
  • Sold as a frameset, not a bare frame.
  • Maximum tire basis: label.
  • Aluminum construction.

52 further fields the checker looks for are not listed by Merida, so we leave them blank rather than estimate them, and those 52 checks stay silent on this frame. Missing: minimum rear rotor, shock eye, shock stroke, shock mount, travel, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, alt shock strokes, shock stroke by size, shock by size, travel by stroke, minimum fork travel, fork travel hard, coil approved, fork travel maximum stated, excludes shock families, excludes coil, maximum fork axle to crown, drive mode, dropout type, gearbox mount, belt drive, udh unstated, udh retrofit kit, maximum tire mm, maximum tire by wheel, maximum chainring, front derailleur mount, front derailleur clamp diameter, front derailleur direct mount, head tube upper, head tube lower, head tube upper angle, head tube lower angle, head tube upper alts, head tube lower alts, rear axle alts, headset included, headset included model, headset included part, maker shocks and ASTM category. Each is recorded as “not listed by Merida”.

Each version links the page it was listed on, in its own details above. Checked 2026-07-10 to 2026-07-16.

Specs last checked July 16, 2026