Scott Gambler Frame
What it needs from the rest of the bike
- Wheel configs
- Frame takes 29" and 29"/27.5" wheels
- Travel
- Frame travel 210 mm (maker-stated)
- Shock eye
- Shock eye-to-eye 250 mm
- Shock stroke
- 75 mm
- Shock mount
- Standard eyelet
- Maximum fork travel
- Approved for a fork up to 200 mm of travel
- Rear axle
- SuperBoost 157x12
- Bottom bracket
- Bottom-bracket shell PressFit 107 (DH)
- Head tube upper
- Upper head-tube bore ZS56/28.6 (S.H.I.S.)
- Head tube lower
- Lower head-tube bore ZS56/40 (S.H.I.S.)
- Seat tube
- Seatpost diameter 31.6 mm
- Maximum rear rotor
- Rear rotor up to 203 mm (maker-stated maximum)
- UDH
- Dropout: not listed by the maker
$2,800.00 Price: not an MSRP. This is an OE-only part, never sold separately at a consumer price.
Weight: 3900 g (sample).
Listed on scott-sports.com. Checked 2026-07-16.
Specified on
Complete bikes whose build kit lists this part.
Same standards in other frames
- Bottom bracket: Bottom-bracket shell PressFit 107 (DH)
4 other frames in our mountain bike catalog state this figure on every version: Commencal FRS, Commencal Supreme DH V5, Commencal Supreme DH V5.2, Cube TWO15 Pro. - Rear axle: SuperBoost 157x12
19 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Commencal Supreme DH V5, Evil Following LS, Evil Wreckoning LS, Intense M1, Pivot Mach 6, Polygon Collosus DH9. - Head tube upper: Upper head-tube bore ZS56/28.6 (S.H.I.S.)
23 other frames in our mountain bike catalog state this figure on every version; 6 from other makers: Transition Spire, Commencal Meta HT V3, Commencal Supreme DH V5.2, Frameworks DH Frame, Nicolai G1, RAAW Madonna V3.
Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.
Other Scott frames
- Scott Genius · Frame takes 29" wheels · Rear axle Boost 148x12 · Fits a Tapered (1.5-1.125) head tube
- Scott Scale RC (900 Team) · Frame takes 29" wheels · Rear axle Boost 148x12 · Fits a Tapered (1.5-1.125) head tube
More frames, all brands
- Banshee Phantom
- Cannondale Jekyll
- Canyon Neuron
- Commencal Clash V3
- Commencal Supreme DH V5
- Cube Reaction C:62
- Evil Insurgent LS
- Forbidden Dreadnought
- Geometron G1
- Ibis Ripmo V2
- Juliana Roubion
- Mondraker F-Podium
- Nukeproof Scout 290
- Pipedream The Full Moxie
- Polygon Collosus T8 Carbon
- RAAW Madonna V3.2
- RAAW Yalla!! V2
- Rocky Mountain Slayer
- Santa Cruz V10 8
- Scott Genius
- Specialized Stumpjumper 15 Alloy
- Transition Spire
- Transition Spur Carbon
- Vitus Escarpe
- Yeti SB140
- Yeti SB165
More from Scott
More specs5 listed·49 not listed by Scott
- Fits a Straight 1.125 (dual-crown) head tube.
- Brake mount Post mount.
- Full-suspension frame.
- Sold as a frameset, not a bare frame.
- Carbon construction.
49 further fields the checker looks for are not listed by Scott, so we leave them blank rather than estimate them, and those 49 checks stay silent on this frame. Missing: minimum rear rotor, frame reach, frame stack, frame head angle, frame chainstay, frame geo size, rear suspension, shock upper mount, shock lower mount, shock upper bolt, shock upper width, shock lower bolt, shock lower width, alt shock strokes, shock stroke by size, shock by size, travel by stroke, minimum fork travel, design fork travel, fork travel hard, coil approved, fork travel maximum stated, excludes shock families, excludes coil, maximum fork axle to crown, drive mode, dropout type, gearbox mount, belt drive, udh unstated, udh retrofit kit, maximum tire, maximum tire mm, maximum tire basis, maximum tire by wheel, maximum chainring, front derailleur mount, front derailleur clamp diameter, front derailleur direct mount, head tube upper angle, head tube lower angle, head tube upper alts, head tube lower alts, rear axle alts, headset included, headset included model, headset included part, maker shocks and ASTM category. Each is recorded as “not listed by Scott”.
Specs last checked July 16, 2026