PRO Koryak Handlebar
What the checker says2will not fit
Run variant by variant through the mountain bike builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.
Checked against 5904 verified mountain bike parts in this catalog. 5786 produced no finding of any kind; that is Koryak Riser 30. Koryak 3Five Riser 10 Alloy clears 5770. Each variant produces 1 distinct error and 0 distinct warnings.
Will not fit
- Will not fiterror · StemBar/stem clamp mismatch: Handlebar is 35mm but Stem is 31.8mm - a bigger bar cannot fit a smaller stem clamp. On 134 of the 252 verified stems in this catalog. Applies to 2 of 5 variants.
- Will not fiterror · StemBar/stem clamp mismatch: a 31.8mm bar does not clamp in a 35mm stem - the clamp diameters differ. A shim or adapter may make other sizes or standards work, but that is a modification, not a fit. On 118 of the 252 verified stems in this catalog. Applies to 3 of 5 variants.
$55.00 to $70.00 MSRP·280 to 325 g
What the maker states
- Clamp
- Bar clamp 31.8 mm (on 3 of 5 variants); Bar clamp 35 mm (on 2 of 5 variants)
- Width
- 780 mm (on 2 of 5 variants); 800 mm (on 2 of 5 variants); 760 mm (on 1 of 5 variants)
- Rise
- 10 mm (on 2 of 5 variants); 20 mm (on 1 of 5 variants); 30 mm (on 1 of 5 variants); 5 mm (on 1 of 5 variants)
- Material
- Aluminum construction
A value shown as a set or a range differs between this model’s variants and is never one variant’s spec.
5 verified variants
| Variant | Clamp | Width | Rise | Price (MSRP) | Weight | Source | Last checked | Build |
|---|---|---|---|---|---|---|---|---|
| Koryak 3Five Riser 10 Alloy | Bar clamp 35 mm | 780 mm | 10 mm | $70.00 | 320 g | maker’s page | 2026-09-08 | Build with this |
| Koryak 3Five Riser Alloy | Bar clamp 35 mm | 800 mm | 20 mm | $70.00 | 325 g | maker’s page | 2026-09-08 | Build with this |
| Koryak Flat Top | Bar clamp 31.8 mm | 760 mm | 5 mm | $55.00 | 280 g | maker’s page | 2026-09-08 | Build with this |
| Koryak Riser 10 | Bar clamp 31.8 mm | 780 mm | 10 mm | $55.00 | 300 g | maker’s page | 2026-09-08 | Build with this |
| Koryak Riser 30 | Bar clamp 31.8 mm | 800 mm | 30 mm | $55.00 | 310 g | maker’s page | 2026-09-08 | Build with this |
Source
Source: each variant links the maker’s own page in the table above. Last checked 2026-09-08.
Checked against
The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.
- 5DEV R-SPEC Trail/Enduro Cranks (Crankset) No conflicts found
- 9point8 Fall Line (Dropper Post) No conflicts found
- 9point8 Stout (31.8, 30mm) (Stem) Will not fit
- ACID SLX 30 front (Front Wheel) No conflicts found
- ACID SLX 30 rear (Rear Wheel) No conflicts found
- Acros ZS44/ZS56 (Headset) No conflicts found
6 of 1747 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.