PRO Tharsis Stem

$80.00 to $100.00 1 · 125 to 150 g (sample)
The same on every Tharsis
- Clamp
- Bar clamp 35 mm
Differs by version: length. Each version’s own figures are in its details.
Which Tharsis exists
One box per version in our catalog, each with its own price. Nothing here is picked for you.
† estimate
Tap a box to see that exact stem: its price, weight, source and build button, and the complete bikes it is specified on.
Every version
PRO Tharsis
$95.00
Price: sample. The only source is a maker spec page that never publishes a price.
- Length
- 35 mm
- Mount
- not listed
- Weight
- 145 g (sample)
- Checked
- 2026-09-08
- Source
- pro-bikegear.com (where PRO Tharsis was listed)
Where to buy
These are paid links: we may earn a commission. As an Amazon Associate I earn from qualifying purchases. How links work
A link never changes a fit verdict or the order parts appear in.
Specified on
No complete bike in our catalog lists this exact version in its build kit.
PRO Tharsis DM
$80.00
Price: sample. The only source is a maker spec page that never publishes a price.
- Length
- 45 mm
- Mount
- direct-mount
- Weight
- 125 g (sample)
- Checked
- 2026-09-08
- Source
- pro-bikegear.com (where PRO Tharsis DM was listed)
Where to buy
These are paid links: we may earn a commission. As an Amazon Associate I earn from qualifying purchases. How links work
A link never changes a fit verdict or the order parts appear in.
Specified on
No complete bike in our catalog lists this exact version in its build kit.
PRO Tharsis 35
$100.00
Price: no maker price exists. The shown price is from a third-party listing.
- Length
- 60 mm
- Mount
- not listed
- Weight
- 150 g (sample)
- Checked
- 2026-07-31
- Source
- pro-bikegear.com (where PRO Tharsis 35 was listed)
Where to buy
These are paid links: we may earn a commission. As an Amazon Associate I earn from qualifying purchases. How links work
A link never changes a fit verdict or the order parts appear in.
Specified on
No complete bike in our catalog lists this exact version in its build kit.
- The price basis differs between variants. Open one to see each. Back to price
Same standards in other stems
- Clamp: Bar clamp 35 mm
71 other stems in our mountain bike catalog state this figure on every version; 6 from other makers: Renthal Integra35, Syntace F35, BikeYoke Barkeeper, ENVE M7 Stem (50mm), Gusset TS Stem 35mm clamp, Merida Expert eTR II.
Two parts stating the same figure is not a fit check: whether parts work together depends on both of them, and the builder checks the whole build.
Other PRO stems
- PRO Koryak
- PRO LT · Bar clamp 31.8 mm · Length 40 mm
More stems, all brands
- Bontrager Line Pro Direct Mount 50
- Burgtec Enduro MK3
- Canyon Iridium Stem
- Diamondback DB35 35mm
- ENVE M6 Stem (50mm)
- FSA Gradient Stem
- Funn Nixie
- Funn Stryge
- Hope Direct Mount Stem
- Kona Stem 35mmx40mm
- Kona XC/BC 35
- OneUp Direct Mount Stem
- PRO LT
- Production Privee R2R
- Race Face Atlas
- Renthal Integra35
- Renthal Integra
- Ritchey WCS Carbon Matrix C220 84D Stem
- Sonder Storc 7deg
- Spank DM 40 Stem
- SRAM Atmos
- Syntace Flatforce
- TAG Metals T1 Stem
- TOSEEK Mountain Bike Stem Without Logo 6°
- Truvativ Descendant
- Vitus Alloy Stem
More from PRO
More specs2 listed·6 not listed by PRO
- Length 35 mm (on 1 of 3 variants); Length 45 mm (on 1 of 3 variants); Length 60 mm (on 1 of 3 variants).
- direct-mount (on 1 of 3 variants).
6 further fields the checker looks for are not listed by PRO, so we leave them blank rather than estimate them, and those 6 checks stay silent on this stem. Missing: stack height, material, rise angle, ASTM category, bar clamp width and construction. Each is recorded as “not listed by PRO”.
Each version links the page it was listed on, in its own details above. Checked 2026-07-31 to 2026-09-08.
Specs last checked September 8, 2026