BuildMyMTB
Prototype - Evolving Daily

Shimano E-Bike Crank Arm Set (FC-EM600) Cranks

Cranks: Crank interface shimano-ep8; Arm length 165 mm. 1 verified variant.

What the checker says4will not fit

Run variant by variant through the e-MTB builder’s own engine. Every sentence below is the checker’s, unedited. Nothing here says this part fits your bike; it says what it does and does not fit among the parts we hold.

Checked against 495 verified e-MTB parts in this catalog. 491 produced no finding of any kind.

Will not fit

  • Will not fiterror · Motor / Drive unitCranks do not fit this motor: Shimano E-Bike Crank Arm Set (FC-EM600) is a shimano-ep8-spline crank and Bosch Performance Line CX (BDU374Y) has a isis spindle. E-MTB cranks bolt straight to the drive unit spindle, so the spline standard must match. On 1 of the 6 verified motor / drive units in this catalog.
  • Will not fiterror · Motor / Drive unitCranks do not fit this motor: Shimano E-Bike Crank Arm Set (FC-EM600) is a shimano-ep8-spline crank and Bosch Performance Line CX (BDU384Y) has a isis spindle. E-MTB cranks bolt straight to the drive unit spindle, so the spline standard must match. On 1 of the 6 verified motor / drive units in this catalog.
  • Will not fiterror · Motor / Drive unitCranks do not fit this motor: Shimano E-Bike Crank Arm Set (FC-EM600) is a shimano-ep8-spline crank and Fazua RIDE 60 Drive Unit has a etor spindle. E-MTB cranks bolt straight to the drive unit spindle, so the spline standard must match. On 1 of the 6 verified motor / drive units in this catalog.
  • Will not fiterror · Motor / Drive unitCranks do not fit this motor: Shimano E-Bike Crank Arm Set (FC-EM600) is a shimano-ep8-spline crank and TQ HPR50 Drive Unit has a isis spindle. E-MTB cranks bolt straight to the drive unit spindle, so the spline standard must match. On 1 of the 6 verified motor / drive units in this catalog.
The checker compares the dimensions listed in what we check, and what we don’t. “No conflicts found” means no conflict among those dimensions — not a guarantee that a build works. Errors mean it won’t fit; warnings mean it works but check; infos are notes.

$59.00 MSRP

What the maker states

Crank interface
Shimano-ep8
Arm length
165 mm
The rest of what the maker states1 not published

1 further field the checker looks for is not published by Shimano, so we leave it blank rather than estimate it, and that check stays silent on this cranks. It is ring. Each is recorded as “not stated by the maker (not checked)”.

Source: the maker’s page. Last checked 2026-08-01.

Checked against

The checker ran this model against every verified part below that it has a slot for, the same way it checks a build in the builder. What follows is the verdict it actually produced for that specific pairing — not a recommendation, and not a guarantee any of these parts fits your own bike.

6 of 265 counterparts with a page of their own that the checker actually probed this model against, in alphabetical order by brand and model — never by price, popularity or the verdict itself.

Where this sits

All Shimano cranksOpen a variant in the builder to see the ones that apply to your own parts